m501

While the 500 series market has plenty of colored mic preamplifier options, the natural, musical clarity of the m501 makes it a welcome addition to the field. This circuit is for engineers confident with the quality of the source, mic section and placement, and wish to capture it with as little coloration or distortion as possible.

The m501 module is a balanced, transformerles design, with 48V phantom, a 75Hz HPF and a 1/4" HI-Z instrument input. Also standard is our exclusive ribbon mic mode, which raises the mic input impedance, bypasses the input decoupling capacitors and deactivates 48V phantom to protect delicate ribbon mics from damage.

Large diaphragm, vintage ribbon or trusty dynamic - the m501 brings out the very best in any microphone and takes the guesswork out of your input chain.

• Fast and musical transimpedance architecture

• Precision audio path with 0.5% precision metal film resistors

• New 12 position gold plated rotary gain switch

• High performance output line driver amplifier and HPF amplifier

• New Ribbon mic mode (also great for dynamic mics) - Relay bypass of phantom power decoupling capacitors, increased input impedance, and 48V lockout

• Wide 10-75dB gain range

• Enhanced RFI interference suppression

• Three output connectors: XLR balanced, TRS balanced and ¬º" unbalanced

• Bombproof laser-etched black anodized frontpanel

• Sealed gold contact relay for Hi-Z input switching

• Led indicators for +48V, Ribbon mode, and HPF

GAIN RANGE (5dB steps)

Mic input : 10-65dB

Hi-Z input : -10-45dB

Output trim control : 0 to +10dB

THD+N 1kHz, 22Hz-22kHz BW

@ 20dB Gain +20dBu out : <0.00085%

@ 40dB Gain +20dBu out : <0.0010%

@ 60dB Gain +20dBu out : <0.0050%

INTERMODULATION DISTORTION

@ 40dB Gain, +20dBu out:

SMPTE/DIN 4:1 7kHz/50Hz : <0.0020

NOISE - REFERRED TO INPUT @ 60dB Gain

50 source : <-130dB

150 source : <-128dB

600 source : <-124dB

CMRR, @60dB Gain, 3.5Vcm

100Hz : >55dB

1kHz : >75dB

10kHz : >65dB

PHASE DEVIATION (HPF off)

50Hz-25kHz @40dB Gain : <10

FREQUENCY RESPONSE

Mic input @ 40dB Gain -3dB : 3.8Hz-288kHz

Mic input @ 40dB Gain -0.5dB : 8.35Hz-135kHz

Hi-Z input @ 20dB Gain -3dB : 1.7Hz-180kHz

Hi-Z input @ 20dB Gain -0.5dB : 4Hz-72kHz

IMPEDANCE

Mic input : 8.1k

Mic input, Ribbon mode : 20k

Hi-Z input (unbalanced) : 2.5M

Hi-Z input (balanced) : 5M

Balanced Output : 300

Unbalanced Output : 150

PEAK LED METER

Green threshold : -12dBu

Red threshold : +16dBu

MAXIMUM OUTPUT LEVEL

100k Ohm load, 0.1% THD , 1kHz, API Lunchbox : 27dBu

WEIGHT and DIMENSIONS

0.7 lb : H5.25 x W1.5 x D6.6

316g : H13.34cm x W3.81cm x D16.75cm

POWER CONSUMPTION

Current required from +16V and -16V power supplies : 120mA Max